0
Baltic Birch Plywood 3mm Marking
Mark
LightBurn
4 views
Laser Parameters
| Power (?) |
10.0 % EZ2: Power / Current · RDW: Maximum Power
|
|---|---|
| Speed (?) | 3,000.00 mm/s |
| Passes (?) |
1 EZ2: Loop count · EZ3: Loop count
|
| Line Interval (?) |
0.05 mm EZ2: Line Space · EZ3: Pad spacing · RDW: Scanning interval
|
| Material Thickness | 3.00 mm |
| Air Assist (?) |
Off LB: Air · RDW: If Blowing
|
Description
Light engraving on baltic birch without charring
Verifications (0)
No verifications yet. Be the first to verify these settings!
Test Logs (0)
No test logs yet. Be the first to document a real result.